Aerial view of a flooded gypsum quarry with turquoise water

—Sustainability

Materials that cut the CO₂ footprint.

The ZAG Group supplies GBFS, fly ash and other supplementary cementitious materials to cement and building materials producers.

01Supplementary cementitious materials

Clinker substitution.

Supplementary cementitious materials are industrial byproducts used to replace a portion of clinker. They lower CO₂, improve durability and reduce reliance on virgin raw materials.

Slag cement can typically replace 20–80% of cementitious material by weight, according to the Slag Cement Association. A calculated difference between two industry-average cradle-to-gate EPDs is 772 kg CO₂e per tonne of slag cement used in place of portland cement — not per tonne of concrete.

02Byproducts

Byproducts repurposed.

These are byproducts that would otherwise be wasted.

GBFS is an ironmaking byproduct that becomes a high performance cement ingredient once granulated and ground. The ZAG Group supplies GBFS, fly ash and other SCMs so producers can use them in place of a portion of clinker.

Sourced figures

Sourced CO₂ and replacement figures

~772 kg CO₂e less per tonne of slag cement used in place of portland cement
About 772 kilograms of CO2 equivalent less per tonne of slag cement used in place of portland cement. This is a calculated difference between two industry-average environmental product declarations, and it is not a figure for a tonne of concrete.
typical share of cementitious material, by weight, that slag cement can replace
20 to 80 percent

The 772 kg CO₂e figure is a calculated difference between two industry-average cradle-to-gate (A1–A3) EPDs, GWP100, and is not a measured project result, not a figure per tonne of concrete, and not a ZAG volume total. Portland Cement Association, Industry Average EPD for Portland Cement (EPD 195, issued 12 March 2021, revised October 2023), 919 kg CO₂e per metric tonne: https://www.cement.org/wp-content/uploads/2026/07/PCA_EPD_Portland_Athena_Final_revised_Jul2026.pdf (current copy; validity extended to 31 July 2027). Slag Cement Association, Industry Average EPD for Slag Cement, 2021, 147.0 kg CO₂e per metric tonne, https://www.slagcement.org/epd. 919 − 147 = 772 kg CO₂e, or about 84% less, per tonne of slag cement used in place of portland cement. Replacement range: Slag Cement Association, FAQs, https://www.slagcement.org/faqs (typical 20–80% of cementitious material by weight). Market figures: U.S. Geological Survey, Mineral Commodity Summaries 2026, Cement (February 2026). All figures are in metric tons.

Ask about SCM supply.

Tell us the material, volume and destination, and we'll come back with sourcing options.

Request supply