ASTM C989 and EN 15167: how slag grades are specified

Two widely used standards set out how ground granulated blast-furnace slag is classified and supplied.

· 5 min read · The ZAG Group

ASTM C989 is the Standard Specification for Slag Cement for Use in Concrete and Mortars. It classifies slag cement in three grades — Grade 80, Grade 100 and Grade 120 — according to a slag activity index. The index compares the strength of a mortar made with equal masses of slag cement and a reference portland cement against a mortar made with the reference portland cement alone. Grade 120 is the highest activity grade in the standard.

The numerical minima for each grade are set out in the standard itself, which is the authoritative source. This note does not reproduce those tables. Specifying a grade is a technical decision for the receiving facility and the mix; nothing here recommends a grade.

EN 15167 is the European standard for ground granulated blast furnace slag for use in concrete, mortar and grout. It sets requirements for the material when it is supplied as a separate addition. Common cements that already contain blast-furnace slag, as a finished cement rather than a separate addition, are covered by EN 197-1, the European standard for common cements.

These are the standards cited on this site. Listing them is not a claim that any particular cargo is certified to a grade, and it is not a substitute for reading the standards or the specification that applies to a given delivery.

Sources

  1. ASTM International, C989/C989M, Standard Specification for Slag Cement for Use in Concrete and Mortars
  2. CEN, EN 15167, Ground granulated blast furnace slag for use in concrete, mortar and grout
  3. CEN, EN 197-1, Cement — Composition, specifications and conformity criteria for common cements

Need supply for your facility?

Request supply

Sustainability6 min

What slag cement is, and what 772 kg CO₂e means

Ground granulated blast-furnace slag is a cementitious material. Compared with portland cement, two industry-average EPDs give a calculated difference of 772 kg CO₂e per tonne.

Sustainability5 min

How clinker substitution cuts the CO₂ from cement

Most of the direct CO₂ associated with cement comes from making clinker. Replacing a portion of that clinker with materials such as slag cement is one of the measures already in use.

Need a reliable supply partner?

Tell us the material, volume and destination. We'll come back with options.

Request supply