What slag cement is, and what 772 kg CO₂e means
Ground granulated blast-furnace slag is a cementitious material. Compared with portland cement, two industry-average EPDs give a calculated difference of 772 kg CO₂e per tonne.
· 6 min read · The ZAG Group
When iron is made in a blast furnace, a molten co-product called slag is also produced. If that slag is cooled rapidly with water, it forms a sand-sized, glassy granulate. Once dried and ground, the granulate is a cementitious material. The World Steel Association describes this granulated blast-furnace slag as being used primarily as a cementitious material, and notes that using slag in this way avoids landfill and reduces CO₂ in cement production.
In the United States the ground product is specified as slag cement under ASTM C989, Standard Specification for Slag Cement for Use in Concrete and Mortars. In Europe, ground granulated blast furnace slag for use in concrete, mortar and grout is specified under EN 15167. Those are the standard titles; listing them is not a claim of certification.
The 772 kg CO₂e figure used on this site is a calculated difference between two industry-average cradle-to-gate (A1–A3) environmental product declarations, expressed as GWP100. The Portland Cement Association's industry-average EPD for portland cement (EPD 195, issued 12 March 2021, revised October 2023) declares 919 kg CO₂e per metric tonne. The Slag Cement Association's industry-average EPD for slag cement (2021) declares 147.0 kg CO₂e per metric tonne. 919 minus 147 is 772 kg CO₂e, or about 84% less, per tonne of slag cement used in place of portland cement.
That difference is not a measured project result, not a figure per tonne of concrete, and not a ZAG volume total. It compares two declared-unit averages on the same cradle-to-gate basis. The current copy of the PCA EPD has had its period of validity extended to 31 July 2027. The SCA EPD's period of validity has also been extended through 31 July 2027.
On use rates, the Slag Cement Association's published FAQs describe a typical replacement of 20–80% of cementitious material by weight. The share used in any given mix is a specification decision for the receiving facility, not a fixed rate.
Sources
- Portland Cement Association, Industry Average EPD for Portland Cement (EPD 195, issued 12 March 2021, revised October 2023), 919 kg CO₂e per metric tonne, cradle-to-gate (A1–A3), GWP100
- Slag Cement Association, Industry Average EPD for Slag Cement, 2021, 147.0 kg CO₂e per metric tonne, cradle-to-gate (A1–A3); period of validity extended through 31 July 2027
- Slag Cement Association, FAQs, typical replacement of 20–80% of cementitious material by weight
- World Steel Association, Fact sheet: Steel industry co-products
- ASTM International, C989/C989M, Standard Specification for Slag Cement for Use in Concrete and Mortars
- CEN, EN 15167, Ground granulated blast furnace slag for use in concrete, mortar and grout
Need supply for your facility?
Request supply