How cementitious cargoes move: mid-size dry-bulk ships
Cement, clinker, slag, ash and gypsum move in bulk, in Handysize, Handymax, Supramax and Ultramax ships — not in containers.
· 5 min read · The ZAG Group
Cement, clinker, ground or granulated blast-furnace slag, coal-combustion ash and gypsum are dry-bulk cargoes. They are loaded into the holds of bulk carriers and discharged into silos or stockpiles at the receiving facility. They do not travel in containers.
The mid-size dry-bulk classes commonly used for this work are Handysize, Handymax, Supramax and Ultramax. Those classes can enter a wider range of ports than the largest bulk carriers and can work with the draft, berth and discharge equipment at many cement and materials terminals. This note names the classes; it does not quote deadweight ranges, and it does not describe any particular fixture.
Scheduling a ship is not only a freight-rate decision. The vessel has to arrive when the receiving facility has room in the silo, the berth is free, and the discharge window is workable. A mismatch shows up as waiting time, or as a facility that runs short of material.
The carriage of solid bulk cargoes is framed by the International Maritime Organization's International Maritime Solid Bulk Cargoes (IMSBC) Code, which sets out how listed bulk cargoes are to be carried safely. This article is a general description of dry-bulk practice for cementitious materials. It does not describe The ZAG Group's fixtures, routes or counterparties.
Sources
Need supply for your facility?
Request supply